Image Deskew
Overview
During mechanical feeding, some documents may get out of
alignment during the scan process. Documents may be produced with
varying degrees of misalignment known as the skew angle of the
document.
The Image Deskew feature can be used to detect and correct this
skew angle. It also allows you to specify the minimum and maximum
angles that should be corrected.
Procedure
To set Image Deskew, use the following procedure:
- Select the image database and click [Scanning
Module].
- On the Scanning Module main window, click on [Image
Control] to open the Scanner Image Control window.
- Click [Advanced Scanner Features].
- Click [Image De-Skew] to open the
Deskew/orientation dialog box.
- Disable or enable skew detection and auto de-skew.
- Minimum Angle, Maximum Angle skew angles (in degrees)
can be corrected for the selected controller.
- Disable or enable automatic image orientation of
skewed images.
- Accuracy can be set for the selected controller.
- When all selections have been made, click [OK].
Related Topic
Introduction to
Advanced Features
|